News Center

UCC21540A

Reinforced isolation dual-channel gate driver with disable, and dead time control

描述

The UCC2154x is an isolated dual channel gate driver family designed with up to 4-A/6-A peak source/sink current to drive power MOSFET, IGBT, and GaN transistors. UCC21540 in DWK package also offers 3.3-mm minimum channel-to-channel spacing which facilitates higher bus voltage.

The UCC2154x family can be configured as two low-side drivers, two high-side drivers, or a half-bridge driver. The input side is isolated from the two output drivers by a 5.7-kVRMS isolation barrier, with a minimum of 100-V/ns common-mode transient immunity (CMTI).

Protection features include: resistor programmable dead time, disable feature to shut down both outputs simultaneously, integrated de-glitch filter that rejects input transients shorter than 5ns, and negative voltage handling for up to –2V spikes for 200ns on input and output pins. All supplies have UVLO protection.

特性

• Wide body package options

• DW SOIC-16: pin-2-pin to UCC21520

• DWK SOIC-14: 3.3 mm Ch-2-Ch spacing

• CMTI greater than 100 V/ns

• Up to 4-A peak source and 6-A peak sink output

• Up to 18-V VDD output drive supply

• 5-V and 8-V VDD UVLO Options

• Switching parameters:

• 40-ns maximum propagation delay

• 5-ns maximum delay matching

• 5.5-ns maximum pulse-width distortion

• 35-µs maximum VDD power-up delay

• Resistor-programmable dead time

• TTL and CMOS compatible inputs

• Safety-related certifications:

• 8000-VPK reinforced isolation per DIN V VDE V 0884-11:2017-01

• 5700-VRMS isolation for 1 minute per UL 1577

• CQC certification per GB4943.1-2011 (Planned)